NAV
This is an archived version
of the documentation
View the latest version

Introduction

A Namerd config example

storage:
  kind: io.l5d.inMemory
  namespaces:
    galaxyquest: |
      /host       => /#/io.l5d.fs;
      /svc => /host;
namers:
- kind: io.l5d.fs
  rootDir: examples/disco
interfaces:
- kind: io.l5d.thriftNameInterpreter
  port: 4100
  ip: 0.0.0.0
  retryBaseSecs:  600
  retryJitterSecs: 60
- kind: io.l5d.httpController
  port: 4321

Welcome to the Configuration Reference for Namerd!

Namerd’s configuration is controlled via a config file, which must be provided as a command-line argument. It may be a local file path or - to indicate that the configuration should be read from the standard input.

File Format

The configuration may be specified as a JSON or YAML object.

Key Required Description
admin no Configures Namerd’s administrative interface. Namerd admin has the same options as Linkerd admin.
interfaces yes Configures Namerd’s published network interfaces.
storage yes Configures Namerd’s storage backend.
namers no Configures Namerd’s integration with various service discovery backends. Namerd uses the same namers as Linkerd.
telemetry no Configures Namerd’s metrics instrumentation. Namerd does not support tracing, so tracers provided by telemeters are ignored.

Administrative interface

admin:
  ip: 127.0.0.1
  port: 9991

Namerd supports an administrative interface. The exposed admin port and IP are configurable via a top-level admin section.

Key Default Value Description
ip loopback address IP for the admin interface. A value like 0.0.0.0 configures admin to listen on all local IPv4 interfaces.
port 9991 Port for the admin interface.

Administrative endpoints

Namerd’s admin interface mirrors Linkerd’s, with one exception: the /delegator.json endpoint in Linkerd is served as /dtab/delegator.json in Namerd.

To learn about default admin endpoints, have a look at Linkerd’s administrative interface.

For metrics information, Namerd also exposes Linkerd’s CommonMetrics endpoints by default.

Interfaces

An interface is a published network interface to Namerd. All of the interfaces listed below provide Finagle’s NameInterpreter functionality for remote resolution of destinations using dtabs stored in Namerd. Additionally, the io.l5d.httpController interface provides a dtab read/write API that’s used by namerctl.

Key Default Value Description
kind required Either io.l5d.thriftNameInterpreter, io.l5d.mesh, or io.l5d.httpController.
ip interface dependent The local IP address on which to serve the namer interface.
port interface dependent The port number on which to serve the namer interface.
tls no tls The namer interface will serve over TLS if this parameter is provided. See Server TLS.

Thrift Name Interpreter

kind: io.l5d.thriftNameInterpreter

A read-only interface providing NameInterpreter functionality over the ThriftMux protocol. Use Linkerd’s io.l5d.namerd interpreter to resolve destinations via this interface.

Key Default Value Description
ip loopback address The local IP address on which to serve the namer interface. A value like 0.0.0.0 configures Namerd to listen on all local IPv4 interfaces.
port 4100 The port number on which to serve the namer interface.
cache see cache Binding and address cache size configuration.
tls no tls The namer interface will serve over TLS if this parameter is provided. See Server TLS.

Cache

Key Default Value Description
bindingCacheActive 1000 The size of the binding active cache.
bindingCacheInactive 100 The size of the binding inactive cache.
addrCacheActive 1000 The size of the address active cache.
addrCacheInactive 100 The size of the address inactive cache.

gRPC Mesh Interface

kind: io.l5d.mesh

A read-only interface providing NameInterpreter functionality over the gRPC protocol. Use Linkerd’s io.l5d.mesh interpreter to resolve destinations via this interface.

Key Default Value Description
ip loopback address The local IP address on which to serve the namer interface. A value like 0.0.0.0 configures Namerd to listen on all local IPv4 interfaces.
port 4321 The port number on which to serve the namer interface.
tls no tls The namer interface will serve over TLS if this parameter is provided. See Server TLS. The server TLS key file must be in PKCS#8 format.

Http Controller

kind: io.l5d.httpController

The HTTP controller provides APIs for reading and writing dtabs, as well as for viewing how names are resolved. This API can also be accessed using the namerctl command line tool. Additionally, this API provides an HTTP implementation of the NameInterpreter interface. Use Linkerd’s io.l5d.namerd.http interpreter to resolve destinations via this interface.

Key Default Value Description
ip loopback address The local IP address on which to serve the namer interface. A value like 0.0.0.0 configures Namerd to listen on all local IPv4 interfaces.
port 4180 The port number on which to serve the namer interface.
tls no tls The namer interface will serve over TLS if this parameter is provided. See Server TLS.

GET /api/1/dtabs

Sample request

curl :4180/api/1/dtabs

Sample response

["default"]

Returns a list of all dtab namespaces.

Response Code Description
200 Ok

Content-types: application/json

GET /api/1/dtabs/<namespace>

Sample request

curl :4180/api/1/dtabs/default

Sample response

[{"prefix":"/svc","dst":"/#/io.l5d.fs"}]

Returns the requested dtab. The dtab version is returned in the Etag response header.

Parameter Type Description
namespace path The dtab namespace to retrieve.
watch uri If true, updates are returned as a streaming response.
Accept header The requested content type for the dtab (application/dtab or application/json).
Response Code Description
200 Ok
404 Dtab namespace does not exist

Content-types: application/json, application/dtab

POST /api/1/dtabs/<namespace>

Sample request

curl :4180/api/1/dtabs/pandoracorn -X POST -d '/foo => /bar' -H 'Content-Type: application/dtab'

Sample response (204 NO CONTENT)

Creates a new dtab with the given namespace. The post body should contain the dtab to create and can be in json or dtab format.

Parameter Type Description
namespace path The dtab namespace to create.
Content-Type header The content type of the provided dtab (application/dtab or application/json).
N/A post-body The dtab to create.
Response Code Description
204 Created
400 Dtab is malformed
409 Dtab namespace already exists

PUT /api/1/dtabs/<namespace>

Sample request

curl :4180/api/1/dtabs/pandoracorn -X PUT -d '/bar => /bas' -H 'Content-Type: application/dtab'

Sample response (204 NO CONTENT)

Modifies an existing dtab. The post body should contain the updated dtab.

Parameter Type Description
namespace path The dtab namespace to update.
Content-Type header The content type of the provided dtab (application/dtab or application/json).
If-Match header If provided, the update will only be applied if the If-Match header matches the current dtab version. This can be used to prevent conflicting updates.
N/A post-body The dtab to create.
Response Code Description
204 Updated
400 Dtab is malformed
404 Dtab namespace does not exist
412 If-Match header is provided and does not match the current dtab version

DELETE /api/1/dtabs/<namespace>

Sample request

curl :4180/api/1/dtabs/pandoracorn -X DELETE

Sample response (204 NO CONTENT)

Deletes an existing dtab with the given namespace. Returns status code 404 if the dtab namespace does not exist.

Parameter Type Description
namespace path The dtab namespace to delete.
Response Code Description
204 Deleted
404 Dtab namespace does not exist

GET /api/1/bind/<namespace>

Sample request

curl ':4180/api/1/bind/default?path=/http/1.1/GET/default'

Sample response

{
   "bound" : {
      "addr" : {
         "type" : "bound",
         "meta" : {},
         "addrs" : [
            {
               "meta" : {},
               "ip" : "127.0.0.1",
               "port" : 9990
            }
         ]
      },
      "id" : "/#/io.l5d.fs/default",
      "path" : "/"
   },
   "type" : "leaf"
}

Returns the bound tree for the given logical name in the context of the given namespace.

Parameter Type Description
namespace path The dtab namespace to use.
path uri The logical name to bind.
dtab uri Additional dtab entries to use, in application/dtab format.
watch uri If true, updates are returned as a streaming response.
Response Code Description
200 Ok
400 Path is malformed

Content-types: application/json

GET /api/1/addr/<namespace>

Sample request

curl ':4180/api/1/addr/default?path=/%23/io.l5d.fs/default'

Sample response

{
   "addrs" : [
      {
         "meta" : {},
         "ip" : "127.0.0.1",
         "port" : 9990
      }
   ],
   "meta" : {},
   "type" : "bound"
}

Returns the addresses for a given concrete name.

Parameter Type Description
namespace path The dtab namespace to use.
path uri The logical name to bind.
watch uri If true, updates are returned as a streaming response.
Response Code Description
200 Ok
400 Path is malformed

Content-types: application/json

GET /api/1/resolve/<namespace>

Sample request

curl ':4180/api/1/bind/resolve?path=/http/1.1/GET/default'

Sample response

{
   "type" : "bound",
   "meta" : {},
   "addrs" : [
      {
         "ip" : "127.0.0.1",
         "meta" : {},
         "port" : 9990
      }
   ]
}

Returns the addresses for a given logical name. This is effectively a combination of the bind and addr APIs.

Parameter Type Description
namespace path The dtab namespace to use.
path uri The logical name to bind.
dtab uri Additional dtab entries to use, in application/dtab format.
watch uri If true, updates are returned as a streaming response.
Response Code Description
200 Ok
400 Path is malformed

Content-types: application/json

GET /api/1/delegate/<namespace>

Sample request

curl ':4180/api/1/bind/delegate?path=/svc/default'

Sample response

{
   "path" : "/svc/default",
   "type" : "delegate",
   "delegate" : {
      "bound" : {
         "path" : "/",
         "addr" : {
            "type" : "bound",
            "addrs" : [
               {
                  "meta" : {},
                  "ip" : "127.0.0.1",
                  "port" : 9990
               }
            ],
            "meta" : {}
         },
         "id" : "/#/io.l5d.fs/default"
      },
      "type" : "leaf",
      "dentry" : {
         "prefix" : "/svc",
         "dst" : "/#/io.l5d.fs"
      },
      "path" : "/#/io.l5d.fs/default"
   }
}

Returns a delegation tree for a given logical name which shows each step of the delegation process.

Parameter Type Description
namespace path The dtab namespace to use.
path uri The logical name to bind.
dtab uri Additional dtab entries to use, in application/dtab format.
watch uri If true, updates are returned as a streaming response.
Response Code Description
200 Ok
400 Path is malformed

Content-types: application/json

GET /api/1/bound-names

Sample Request

curl :4180/api/1/bound-names

Sample Response

[
   "/#/io.l5d.fs/default"
]

Returns a list of concrete names that Namerd knows about.

Parameter Type Description
watch uri If true, updates are returned as a streaming response.
Response Code Description
200 Ok

Content-types: application/json

Storage

A storage object configures the Namerd dtabStore which stores and retrieves dtabs. This object supports the following parameters:

Key Default Value Description
kind required Either io.l5d.inMemory, io.l5d.k8s, io.l5d.zk, io.l5d.etcd or io.l5d.consul.
experimental false Set this to true to enable the storage if it is experimental.

In Memory

kind: io.l5d.inMemory

Stores the dtab in memory. Not suitable for production use.

Key Default Value Description
namespaces empty map A map of namespaces to corresponding dtabs.

Kubernetes

kind: io.l5d.k8s

Stores the dtab with the Kubernetes master via the ThirdPartyResource APIs. Requires a cluster running Kubernetes 1.2+ with the ThirdPartyResource feature enabled.

Key Default Value Description
host localhost The Kubernetes master host.
port 8001 The Kubernetes master port.
namespace default The Kubernetes namespace in which dtabs will be stored. This should usually be the same namespace in which Namerd is running.

How to check if ThirdPartyResource is enabled (for Kubernetes v1.7 and below)

  1. Open extensions/v1beta1 api - https://<k8s-cluster-host>/apis/extensions/v1beta1.
  2. Check that kind ThirdPartyResource exists in the response.

Example ThirdPartyResource response

{
  "kind": "APIResourceList",
  "groupVersion": "extensions/v1beta1",
  "resources": [
    {
      "name": "thirdpartyresources",
      "namespaced": false,
      "kind": "ThirdPartyResource"
    }
  ]
}

Example of configuration for ThirdPartyResource in Kubernetes

Use this configuration to create the ThirdPartyResource if it does not exist.

metadata:
  name: d-tab.l5d.io # the hyphen is required by the Kubernetes API. This will be converted to the CamelCase name "DTab".
apiVersion: extensions/v1beta1
kind: ThirdPartyResource
description: stores dtabs used by Buoyant's `namerd` service
versions:
  - name: v1alpha1 # Do not change this value as it hardcoded in Namerd and doesn't work with other value.

How to check if CustomResourceDefinition is enabled (for Kubernetes v1.8+)

  1. Open apiextensions.k8s.io/v1beta1 api - https://<k8s-cluster-host>/apis/apiextensions.k8s.io/v1beta1.
  2. Check that kind CustomResourceDefinition exists in the response.

Example CustomResourceDefinition response

{
  "kind": "APIResourceList",
  "apiVersion": "v1",
  "groupVersion": "apiextensions.k8s.io/v1beta1",
  "resources": [
  {
    "name": "customresourcedefinitions",
    "singularName": "",
    "namespaced": false,
    "kind": "CustomResourceDefinition"
  }
  ]
}

Example of configuration for CustomResourceDefinition in Kubernetes

To create a new CustomResourceDefinition if using Kubernetes 1.8 and greater, use this configuration.

kind: CustomResourceDefinition
apiVersion: apiextensions.k8s.io/v1beta1
metadata:
  name: dtabs.l5d.io
spec:
  scope: Namespaced
  group: l5d.io
  version: v1alpha1
  names:
    kind: DTab
    plural: dtabs
    singular: dtab

For a complete example configuration for Namerd configured with k8s storage, see the linkerd-examples repo.

ZooKeeper

kind: io.l5d.zk

Stores the dtab in ZooKeeper.

Key Default Value Description
zkAddrs required A list of ZooKeeper addresses, each of which have host and port parameters.
pathPrefix /dtabs The ZooKeeper path under which dtabs should be stored.
sessionTimeoutMs 10000 ZooKeeper session timeout in milliseconds.
authInfo no auth when logging Configures the authentication information to use when logging. See authInfo.
acls an empty list A list of ACLs to set on each dtab znode created. See acls.

authInfo

Key Default Value Description
scheme required The ZooKeeper auth scheme to use.
auth required The ZooKeeper auth value to use.

acls

Key Default Value Description
scheme required The ACL auth scheme to use.
id required The ACL id to use.
perms required A subset of the string “crwda” representing the permissions of this ACL. The characters represent create, read, write, delete, and admin, respectively.

Etcd

kind: io.l5d.etcd

Stores the dtab in Etcd.

Key Default Value Description
experimental required Because this storage is still considered experimental, you must set this to true to use it.
host localhost The location of the etcd API.
port 2379 The port used to connect to the etcd API.
pathPrefix /namerd/dtabs The key path under which dtabs should be stored.

Consul

kind: io.l5d.consul

Stores the dtab in Consul KV storage.

Key Default Value Description
host localhost The location of the consul API.
port 8500 The port used to connect to the consul API.
pathPrefix /namerd/dtabs The key path under which dtabs should be stored.
token no auth The auth token to use when making API calls.
datacenter uses agent’s datacenter The datacenter to forward requests to.
readConsistencyMode default Select between Consul API consistency modes such as default, stale and consistent for reads.
writeConsistencyMode default Select between Consul API consistency modes such as default, stale and consistent for writes.
failFast false If false, disable fail fast and failure accrual for Consul client. Keep it false when using a local agent but change it to true when talking directly to an HA Consul API.
backoff exponential backoff from 1ms to 1min Object that determines which backoff algorithm should be used. See retry backoff